6. When using the stainless steel coupling (article number TGX: 16300-1556): Place the
7. Align the positioner/mount at the center of the actuator.
8. Tighten the positioner/mount unit.
9. Initialize the positioner.
10.After commissioning, drive the positioner to the end position.
11. Stick the scale
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
Orientation of mount, flameproof enclosure
positioner and the mount on the actuator carefully. Place the stainless steel coupling on
the stump of the actuator's positioner shaft.
④
with the direction of rotation or the swivel range on the coupling wheel
①
. The stickers with scale are self-adhesive.
Installing/mounting
4.3 Mounting the part-turn actuator
47