Emc Filter Module; Ncs 6Dr4004-.N.20 And 6Dr4004-.N.30 - Siemens SIPART PS2 Operating Instructions Manual

Technical data
12.8 Option modules
12.8.5

EMC filter module

EMC filter module type C73451-A430-D23 is required for NCS sensor or an external potentiometer.
External position sensor (potentiometer or NCS; option) with the following maximum values
Resistance of the external potentiometer
Maximum values when powered by the
PROFIBUS basic device
Maximum values when powered by other
basic devices
Galvanic isolation
12.8.6

NCS 6DR4004-.N.20 and 6DR4004-.N.30

Additional modules
Travel range
Linear actuator 6DR4004-.N.20
•
Linear actuator 6DR4004-.N.30
•
Part-turn actuator
•
Linearity (after corrections made by
positioner)
Hysteresis
Temperature influence (range: rota-
tion angle 120° or stroke 14 mm)
Climate class
Storage
•
Transport
•
Vibration resistance
Harmonic oscillations
•
(sine) according to IEC 60068-2-6
Bumping according to IEC 60068-
•
2-29
Torque for cable gland nut made of
258
Without Ex protection With Ex protection Ex ia
-
-
Galvanically connected with the basic device
Without Ex protection
10 to 130 mm (0.39 to 5.12"); up to 200 mm (7.87") on request
≤ 0.1 %/10 K (≤ 0.1 %/18 °F) for -20 to +90 °C (-4 to +194 °F)
≤ 0.2%/10 K (≤ 0.2%/18 °F) for -40 to -20 °C (-40 to -4 °F)
1K5, but -40 to +90 °C (-40 to +194 °F)
2K4, but -40 to +90 °C (-40 to +194 °F)
3.5 mm (0.14"), 2 to 27 Hz, 3 cycles/axis
98.1 m/s² (321.84 ft/s²), 27 to 300 Hz, 3 cycles/axis
300 m/s
Plastic
2.5 Nm (1.8 ft lb)
10 kΩ
U = 5 V
o
I = 75 mA static
o
I = 160 mA short-term
o
P = 120 mW
o
U = 5 V
o
I = 100 mA
o
P = 33 mW
o
C = 1 μF
o
L = 1 mH
o
With Ex protection
Ex "ia"
3 to 14 mm (0.12 to 0.55")
30 to 100°
± 1 %
± 0.2 %
According to IEC/EN 60721-3
(984 ft/s ), 6 ms, 4000 shocks/axis
2 2
Metal
4.2 Nm (3.1 ft lb)
Operating Instructions, 02/2016, A5E00074631-AB
With Ex protection
Ex "ic", "nA", "t"
U = 5 V
o
I = 75 mA
o
P = 120 mW
o
U = 5 V
o
I = 75 mA
o
P = 120 mW
o
C = 1 μF
o
L = 1 mH
o
With Ex protection
Ex "ic", "nA"
Stainless steel
4.2 Nm (3.1 ft lb)
SIPART PS2 with and without HART