L1. Limit Limit For Number Of Total Strokes 1; L2.Fact1 - Factor 1; L3.Fact2 Factor 2 0.1; L4.Fact3 Factor 3 0.1 - Siemens SIPART PS2 Operating Instructions Manual

L1.LIMIT - Limit for number of total strokes
Adjustment range:
Purpose:
Factory setting:

L2.FACT1 - Factor 1

Adjustment range:
Purpose:
Factory setting:
L3.FACT2 - Factor 2
Adjustment range:
Purpose:
Factory setting:
L4.FACT3 - Factor 3
Adjustment range:
Purpose:
Factory setting:
See also
Display of diagnostics values (Page 207)
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
1 ... 1.00E8
Use this sub-parameter to set the base limit for the number of total
strokes. Set the base limit in a range from '1' to '1.00E8'.
1.00E6
0.1 ... 40.0
Use this sub-parameter to set the factor for formation of threshold
1. Set the factor in a range from '0.1' to '40.0'. The threshold is the
product of 'L1.LIMIT' and 'L2.FACT1'.
The threshold 1 message is displayed when threshold 1 is ex-
ceeded. The process to activate and display this message is de-
scribed in the 'XDIAG' parameter.
1.0
0.1 ... 40.0
Use this sub-parameter to set the factor for formation of threshold
1. Set the factor in a range from '0.1' to '40.0'. The threshold is the
product of 'L1.LIMIT' and 'L3.FACT2'.
The threshold 1 message is displayed when threshold 1 is ex-
ceeded. The process to activate and display this message is de-
scribed in the 'XDIAG' parameter.
2.0
0.1 ... 40.0
Use this sub-parameter to set the factor for formation of threshold
1. Set the factor in a range from '0.1' to '40.0'. The threshold is the
product of 'L1.LIMIT' and 'L4.FACT3'.
The threshold 1 message is displayed when threshold 1 is ex-
ceeded. The process to activate and display this message is de-
scribed in the 'XDIAG' parameter.
5.0
Parameter assignment
9.4 Description of parameters
195