Parameter assignment
9.4 Description of parameters
9.4.2.3
'8.SPRA' Setpoint split range start / '9.SPRE' Setpoint split range end
Adjustment range:
Purpose:
Factory setting:
Figure 9-2
160
0.0 ... 100.0
With these two parameters in combination with parameter
"'7.SDIR' Setpoint direction (Page 159)", you can limit the effective
setpoint. This allows split range tasks with the following character-
istic curves to be solved:
• rising/falling
• falling/rising
• falling/falling
• rising/rising
With "SPRA": 0.0
Example: Split range operation with two positioners
With "SPRE": 100.0
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB