Commissioning; Basic Safety Instructions - Siemens SIPART PS2 Operating Instructions Manual

Commissioning

7.1

Basic safety instructions

Improper commissioning in hazardous areas
Device failure or danger of explosion in hazardous areas.
• Do not commission the device until it has been mounted completely and connected in
• Before commissioning take the effect on other devices in the system into account.
Loss of explosion protection
Danger of explosion in hazardous areas if the device is open or not properly closed.
• Close the device as described in Chapter "Installing/mounting (Page 35)".
Opening device in energized state
Danger of explosion in areas subject to explosion hazard.
• Only open the device in a de-energized state.
• Check prior to commissioning that the cover, cover locks, and cable inlets are
Exception: Devices having the type of protection "Intrinsic safety Ex i" may also be opened
in energized state in hazardous areas.
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
WARNING
accordance with the information in Chapter "Technical data (Page 243)".
WARNING
WARNING
assembled in accordance with the directives.
7
113