Speaker Assembly - HP Classmate Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board.
Remove the speaker assembly:
1. Disconnect the speaker cable from the system board (1).
2. Remove the 2 Phillips PM2.0×3.0 screws (2) that secure each speaker to the computer.
Bottom cover on page 22).
Spare part number
764411-001
Component replacement procedures 31