Storing The Channels Automatically - Samsung CS21A11MH Owner's Instructions Manual

ENG
Downloaded from www.Manualslib.com

Storing the Channels Automatically

Picture
œ œ √
Mode Custom
√
Adjust
Digital NR : Off
Tilt : 0
Select Enter Exit
Channel
√
Auto Store
√
Manual Store
√
Add/Erase
√
Fine Tune
√
Sort
Select Enter Exit
P 1
471 MHz 48 %
Exit
Channel
Sort
From : P 1
To : P--
Store : ?
Select Adjust Exit
14
manuals search engine
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to "Sorting the Stored
Channels" on page 19.
1
Press the MENU button.
2 Press the ▲ or ▼ button to select the
3
Press the œ or √ button to select the
4 Press the œ or √ button again.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
5
When searching and storing is complete, the
displayed.
To...
Sort the stored channels
into the desired numerical order
Exit the channel store function
without sorting the channels
➣
If sound does not work regularly after storing channels, select
the sound system which best corresponds in Manual Store
menu (refer to page 16~17).
.
Channel
.
Auto Store
menu is
Sort
Then...
Go to Step 4 of the "Sorting
the Stored Channels"
procedure on page 19.
Press the MENU ( )
button repeatedly until the
menus isappear.