Speakers - HP 15-cc000 Maintenance And Service Manual

Speakers

Description
Speakers (includes cables)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the optical drive (see
a. Bottom cover (see
b. Battery (see
c. Solid-state drive (see
d. Fan (see
e. System board (see
Remove the speakers:
1. Release the power connector cable from the retention clips (1) and routing channel built into
the right speaker.
2. Release the speaker cable from the retention clips (2) and routing channel built into the keyboard/
top cover.
3. Remove the two Phillips PM2.0×2.9 screws (3) that secure the speakers to the keyboard/top cover.
64 Chapter 5 Removal and replacement procedures
Optical drive on page
Bottom cover on page
Battery on page 38)
Solid-state drive on page
Fan on page 49)
System board on page
35), and then remove the following components:
36)
43)
50)
Spare part number
926857-001