Bottom Cover - HP 15-cc000 Maintenance And Service Manual

4. Remove the Phillips PM2.0×10.7 screw (2) that secures the optical drive to the computer.
5. Remove the optical drive (3).
Reverse this procedure to install the optical drive.

Bottom cover

Description
Bottom cover
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the optical drive (see
Remove the bottom cover:
1. Remove the computer rubber feet (1).
The rubber feet are available using spare part numbers 926855-001
36 Chapter 5 Removal and replacement procedures
Optical drive on page 35).
Spare part number
926832-001