Removal and Replacement Procedures
1. Prepare the notebook for disassembly
remove the following components:
❏
❏
❏
❏
❏
❏
❏
2. Turn the top cover right side up with the front panel
toward you.
3. Release the ZIF connector 1 to which the TouchPad cable is
connected and disconnect the cable 2 from the system board.
Disconnecting the TouchPad Cable
5–56
Optical drive
(Section
Switch cover
(Section
Keyboard
(Section
Display assembly
Base enclosoure
USB/S-Video controller board
Speaker assembly
5.7)
5.8)
5.9)
(Section
5.10)
(Section
5.11)
(Section
(Section
5.13)
Maintenance and Service Guide
(Section
5.3) and
5.12)