Industrial Scientific MX6 iBrid Operation Manual page 12

K F
EY EATURES
Error Events
Data log
NOTE: Data are saved in case of power loss.
8
duration in minutes and seconds, and date and time that alarm
occurred.
Fifteen error events for the instrument are recorded into a FIFO
queue in nonvolatile memory and are time stamped. An error
event is recorded any time that a fault occurs (including pump
faults and fault events during the self-test). The information
stored for each event includes instrument serial number, fault
that occurred, fault error code, date and time stamp, and any
pertinent data (i.e., pump current reading).
Data logging is a feature that allows a variety of system
parameters to be recorded at regular intervals (and saved
internally) for retrieval (and viewing) at a later date. The data
log feature saves the following information:
 Gas Type
 Time of Day
 Temperature
 Alarm Conditions Flagged
 STEL
 Snapshot Enabled/Disabled  TWA
The data log is downloaded when the unit is docked in a
compatible docking station and may be accessed through iNet
Control, Docking Station Server Admin Console (DSSAC), and
Industrial Scientific Accessory Software.
 Gas Reading
 Date
 Battery Level
 User ID
 Site ID