Appendix C, Power Optimizer Mechanical Specifications - SolarEdge SE3000 Installation Manual

Appendix C
Power Optimizer Mechanical
Specifications
This appendix presents the mechanical specifications for the SolarEdge power
optimizers.
Use M6 (1/4") screws and washers to secure the power optimizer units to the
racking.
NOTE:
SolarEdge does not provide the screws, nuts or washers because the required sizes
and lengths vary for different racks.
CAUTION:
Before installing directly on the module or module frame, first consult the module
manufacturer for information about the proper positioning and its impact on the
module warranty.

Mark all mounting hole locations.

Each power optimizer must be attached to the rack using both mounting
holes.

Drill the holes.
CAUTION:
Do not drill through the power optimizer or through the mounting holes. The strong
vibrations created by the drill can damage the power optimizer.
Power Optimizer Mechanical Specifications
SolarEdge Installation Guide – MAN-01-00057-2.0
91