Handling And Safety Instructions - SolarEdge SE3000 Installation Manual

Handling and Safety Instructions

During installation, testing and inspection adherence to the following handling
and safety instructions is mandatory.
Safety Symbols
The following safety symbols are used throughout this document. Familiarize
yourself with the symbols and their meaning before installing or operating this
instrument.
WARNING!
Denotes a hazard. It calls attention to a procedure that, if not correctly performed or
adhered to, could result in injury or loss of life. Do not proceed beyond a warning note
until the indicated conditions are fully understood and met.
CAUTION:
Denotes a hazard. It calls attention to a procedure that, if not correctly performed or
adhered to, could result in damage or destruction of the instrument. Do not proceed
beyond a caution sign until the indicated conditions are fully understood and met.
NOTE:
Denotes additional information about the current subject.
IMPORTANT SAFETY FEATURE:
Denotes information about safety issues.
Instructions
WARNING!
Do not remove the inverter cover before five minutes have elapsed after
disconnecting all sources of power. Only use lockable connectors for DC input.
Otherwise, there is a risk of electric shock form energy stored in the capacitor.
WARNING!
Before operating the SolarEdge inverter, ensure that the power cable and wall outlet
have been grounded properly.
WARNING!
Repairs or testing under power must only be performed by qualified SolarEdge
technicians who are familiar with and qualified to work with the SolarEdge inverter.
WARNING!
This unit is not intended to be opened by a user. It must only be opened by a qualified
technician for installation and maintenance purposes.
CAUTION:
This unit must be operated under the specified operating specifications, as described
in the technical specification document.
SolarEdge Installation Guide – MAN-01-00057-2.0
Handling and Safety Instructions
5