Three Phase Inverters - Replacing The Fans - SolarEdge SE3000 Installation Manual

Three Phase Inverters – Replacing
the Fans
The three phase inverter has two fans, one is accessible from the outside of the
inverter (called Fan 1) and the other is internal and requires a SolarEdge
technician to replace it (called Fan 2).
Figure 16: Inverter Fan 1
►
To replace Fan 1:
1
Unscrew the single screw of the fan cover, shown above, using a Philips
screw driver.
2
Open the fan door.
3
Disconnect the fan door connector, as shown below:
Figure 17: Fan Door Connector
Replacing and Adding System Components
SolarEdge Installation Guide – MAN-01-00057-2.0
43