SolarEdge SE3000 Installation Manual page 30

If you plan to use the SolarEdge Monitoring Portal to access SolarEdge site
information, you will need to add a physical connection for the proper
communication option. Connecting the inverter to the SolarEdge Monitoring
Server via a LAN, an external modem connected to an RS232 port, or a ZigBee
modem is described in Chapter 6, Setting Up Communication on page 45.
Closing the Cover
►
To close the cover:
1
Shut the chassis cover and secure it by tightening the screws.
2
For proper sealing, first tighten the corner screws and then the two central
screws. The recommended order can be seen in the following figure:
#1
#6
#3
Figure 15: Tightening the Screws
SolarEdge Installation Guide – MAN-01-00057-2.0
#2
#5
#4
Installing the Inverter
30