Mounting The Inverter - SolarEdge SE3000 Installation Manual

Mounting the Inverter

CAUTION:
Make sure that you have read the previous sections in this chapter before starting the
mounting process that is described below.
The inverter package provides the inverter and the mounting bracket that is
required to connect it to the wall. Standard tools (not provided) can be used
during its installation.
►
To mount the SolarEdge inverter:
1
Attach the provided bracket to a wall or pole, as follows:

Ensure that the U-shaped part of the bracket is positioned on the top, as
shown below:
Figure 7: Positioning the U-shaped Part of the Bracket

When mounting on a wall, bolt the four outer-most holes of the bracket.
Other holes may be used to stabilize the bracket or when the outer-most
holes cannot be used.

When mounting on a pole, bolt the inner holes of the bracket.
2
Verify that the bracket is firmly attached to the wall or pole.
SolarEdge Installation Guide – MAN-01-00057-2.0
Installing the Inverter
23