Transport And Storage; Inverter Transport; Inverter Storage; Equipment List - SolarEdge SE3000 Installation Manual

Transport and Storage

Inverter Transport

The SolarEdge inverter should be transported in its original packaging, facing up
and without exposing the inverter to unnecessary shocks.

Inverter Storage

Store the inverter in a dry place where ambient temperatures are always between
-20°C and +50°C.

Equipment List

Standard tools can be used during the installation of the SolarEdge system. The
following is a recommendation of the equipment to be used when installing a
SolarEdge system:

Allen screwdriver for M6 and M5 screw types.

Drilling machine and bits suitable for a wall or pole, where the inverter
mounting bracket is installed.

Suitable screws for attaching the inverter mounting bracket to a wall.

M6 (1/4") screws for attaching the power optimizer to the racking.

MC4 crimper

Toolbox, including wire cutters, wire strippers and screwdrivers

Optional: Voltmeter, Electric screwdriver
For installing the communication option, you may also need the following:

For Ethernet: RJ45 connectors

For RS485: A three-wire cable. A four- or six-wire twisted pair telephone
cable may be used.
An inverter has either RJ45/RJ11 connectors or block terminal connectors for
communication. For RJ45/RJ11 connectors, you also require the following:

For Ethernet:

CAT5 twisted pair Ethernet cable

RJ45 crimping tool

For RS485:

RJ11 six-pin connector (also known as RJ25)

RJ11 crimping tool
Introducing the SolarEdge Power Harvesting System
SolarEdge Installation Guide – MAN-01-00057-2.0
12