Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Strongway 52678
Summary of Contents for Strongway 52678
- Page 1 High-Velocity Floor Fan Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #52678 & #52679 SAVE THESE INSTRUCTIONS...
- Page 2 Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
-
Page 3: Table Of Contents
Table of Contents Intended Use ............................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Specific Operation Warnings ....................... 6 Grounding .............................. 6 Extension Cords ............................ 7 Before Each Use ............................ 8 Operating Instructions .......................... 8 After Each Use ............................9 Maintenance ............................ -
Page 4: Intended Use
Intended Use This High-Velocity Floor Fan is designed for air circulation, ventilation, and exhaust. This fan meets OSHA standards. Technical Specifications Item# Size Voltage Watts/Amps CFM / RPM 52678 20" 145/1.2 4725 /1500 52679 18" 130/1.15 4550 /1500 Important Safety Information ⚠WARNING... - Page 5 ⚠WARNING PERSONAL SAFETY • Stay alert, watch what you are doing, and use common sense when operating the fan. Do not use the fan while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury.
-
Page 6: Specific Operation Warnings
• Check for damaged parts before each use. Carefully check that the fan will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the fan with a damaged part. • Do not use a fan with a malfunctioning switch. Any fan that cannot be controlled with the power switch is dangerous and must be repaired by an authorized service representative before using. -
Page 7: Extension Cords
• DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle. Have the proper receptacle installed by a qualified electrician. • CHECK with a qualified electrician or service person if you do not completely understand the grounding instructions, or if you are not sure if the fan is properly grounded. Grounded Fans: Fans with 3-Prong Plugs Tools marked with Grounding Required have a 3-wire cord and 3-prong grounding plug. -
Page 8: Before Each Use
• The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14-gauge cord can carry a higher current than a 16-gauge cord. Minimum extension cord wire size is shown in the following table: Minimum Wire Size Of Extension Cords Cord Length Nameplate AMPS... -
Page 9: After Each Use
Adjusting Airflow Angle Tilt the fan head to the desired angle. This high velocity fan can be used alone or in conjunction with air conditioning. Rotating the fan head upward serves to pull air from the floor and circulate it throughout the entire room. Controlling Speed Select an air speed by setting the switch to one of the following: •... -
Page 10: Replacement Parts
SCREW SET POWER CORD SCREWS RUBBER WASHER MOTOR NUT & WASHER BOLT TUBE BASE REAR GRILL Replacement Parts • For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. • Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. -
Page 11: Limited Warranty
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. - Page 12 Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 12 of 12...