Fan/Heat Sink Assembly - HP ENVY *360 15M Maintenance And Service Manual

Fan/heat sink assembly

NOTE: The fan/heat sink assembly spare part kit includes replacement thermal material.
Description
For use only on computer models equipped with an Intel Core i7-8550U or Intel Core i5-8250U processor
and a graphics subsystem with discrete memory
For use only on computer models equipped with an Intel Core i7-8550U or or Intel Core i5-8250U
processor and a graphics subsystem with UMA memory
For use only on computer models equipped with an Intel Core i7-7500U or Intel Core i5-7200U processor
and a graphics subsystem with discrete memory
For use only on computer models equipped with an Intel Core i7-7500U or Intel Core i5-7200U processor
and a graphics subsystem with UMA memory
Before removing the fan/heat sink assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
Remove the fan/heat sink assembly:
NOTE: Steps 1 through 3 apply to computer models equipped with a graphics subsystem with discrete
memory. See Steps 4 through 6 for fan/heat sink assembly removal information for computer models
equipped with a graphics subsystem with UMA memory.
1. Disconnect the fan cable (1) from the system board.
2. Loosen the six Phillips PM2.0×6.2 captive screws (2) that secure the fan/heat sink assembly to
the system board.
Bottom cover on page
Battery on page 32).
System board on page
30).
41).
Component replacement procedures
Spare part number
936170-001
936169-001
924349-001
924348-001
45