Solid-State Drive - HP ENVY *360 15M Maintenance And Service Manual

3. If it is necessary to disassemble the hard drive, remove the hard drive rubber sleeve (1) from
the hard drive, and then disconnect the hard drive cable (2) from the hard drive.
Reverse this procedure to reassemble and install the hard drive.

Solid-state drive

Description
For use only on computer models with model numbers 15m-bp1xx through 15-bp1xx:
512-GB, 2280, PCIe, NVMe solid-state drive
256-GB, 2280, PCIe, NVMe solid-state drive
For use on all computer models:
512-GB, 2280 M.2, PCIe3×4, SS, NVMe solid-state drive with TLC
360-GB, 2280 M.2, PCIe3×4, SS, NVMe solid-state drive with TLC
256-GB, 2280 M.2, PCIe3×4, SS, NVMe solid-state drive with TLC
256-GB, 2280 M.2, SATA-3, with solid-state drive TLC
128-GB, 2280 M.2, SATA-3 solid-state drive
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
34 Chapter 5 Removal and replacement procedures
Spare part number
L01301-002
L01300-002
847110-015
917818-002
847109-018
759848-028
827560-038