Enabling/Disabling The Rf Card - Accu-Chek INFORM II Operator's Manual

Enabling/disabling the RF card

WARNING
Power Up 12:48
Contrast
11/19/12
Power Up
Contrast
11/19/12
If the unit is equipped with an RF card, you can temporar-
ily enable or disable this functionality as required.
The RF card is automatically reactivated the next time you
power on the meter. You can then disable it again tempo-
rarily, if required.
If you suspect that running the RF card is harming the
patient or affecting other devices, you should carefully
reassess the appropriateness of continued use of the
WLAN functionality of the Accu-Chek Inform II system
using the guidelines of your facility.
If the RF card is activated, the
pm
played as a button in the Power Up screen.
To temporarily disable the wireless network con-
■
nection, touch
screen. The icon then changes to
To temporarily enable the wireless network con-
■
nection, touch
screen. The icon then changes to
The RF ON/RF OFF button always displays the option you
currently have. The current communication status is dis-
played in the status bar (bottom line) of the display in all
menus and screens.
12:48
pm The
■
The
■
municate with the data management system was
successful and was terminated according to the
communication protocol.
The
■
communicate with the data management system
was not successful or was unintentionally termi-
nated. If this icon persists, contact your system
administrator. Ignoring this information may lead to
a Download Lockout (if configured, see page 39).
Powering Up and Entering an Operator ID • 2
(RF OFF) in the Power Up
(RF ON) in the Power Up
icon is displayed, if the RF card is enabled.
icon is displayed if the last attempt to com-
icon is displayed if the last attempt to
(RF OFF) icon is dis-
(RF ON).
(RF OFF).
35