Table of Contents
Advertisement
28 February 1989
4.4 SERVICE PROGRAM SP-8 DATA INPUT GUIDE TABLE
- How to use this table -
1.
After "8" is entered, press the Enter (#) key.
2.
Enter the desired input number using the numeral keys according to the
above table.
3.
Press the Enter (#) key.
4.
Enter the number of copies and press the Start key.
The data (0 or 1) will be displayed in the Magnification indicator.
5.
NOTE: It is possible to check the ON/OFF manually.
Input
Sensor / Switch / Signal
No.
1
Registration Sensor (Copier)
2
Fusing Exit Sensor (Copier)
4
Upper Relay Sensor (Copier)
5
Lower Relay Sensor (Copier)
*6
5th Relay Sensor
(Paper Bank)
lnverter Sensor (Copier)
8
9
Inverter Relay Sensor
(Copier)
10
Paper Exit Sensor
(Multi Duplex/Overlay)
Paper End Sensor
11
(Multi Duplex/Overlay)
* Not for use in this model.
OFF ON
ON: Paper is present
OFF: Paper is not present
OFF ON
ON: Paper is present
OFF: Paper is not present
OFF ON
ON: Paper is present
OFF: Paper is not present
OFF ON
ON: Paper is present
OFF: Paper is not present
OFF ON
ON: Paper is present
OFF: Paper is not present
OFF ON
ON: Paper is present
OFF: Paper is not present
OFF ON
ON: Paper is present
OFF: Paper is not present
OFF ON
ON: Paper is present
OFF: Paper is not present
OFF ON
ON: Paper is present
OFF: Paper is not present
4-32
Remarks
Advertisement
Chapters
Table of Contents
