Label; Position Your Wifi Bridge/Extender - NETGEAR WM2500RP User Manual

Table 2. Back panel port, connector, and button descriptions (continued)
Port, Connector, or Button
Reset button
Internet port

Label

The label of the WiFi bridge/extender shows the default login information, default WiFi
network name (SSID), network key (also referred to as wireless network password or
passphrase), serial number, MAC address, and other information.
Router Login
http://routerlogin.net
user name: admin
password: password
Figure 4. Label

Position Your WiFi Bridge/Extender

The WiFi bridge/extender lets you access your network from virtually anywhere within the
operating range of your wireless network. However, the operating distance or range of your
wireless connection can vary significantly depending on the physical placement of your WiFi
bridge/extender. For example, the thickness and number of walls the wireless signal passes
through can limit the range.
To position your router:
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
Description
Press the Reset button to restore the factory settings. See
on page 57.
A MoCA port for connecting the WiFi bridge/extender to a cable broadband
modem. The Internet port is also referred to as the WAN port.
Hardware Setup
10
Factory Settings