Allow Or Block Access To Your Network; Enable And Manage Network Access Control - NETGEAR R6120 User Manual

After you set up and enable Parental Controls, you can change the web filtering level for each device
on the network through the network map page of the genie app.

Allow or Block Access to Your Network

You can use access control to block or allow access of devices to your network. You define access by
selecting or specifying the MAC addresses of the wired and WiFi devices that either can access your entire
network or are blocked from accessing your entire network.

Enable and Manage Network Access Control

When you enable access control, you must select whether new devices are allowed to access the network
or are blocked from accessing the network. By default, currently connected devices are allowed to access
the network, but you can also block these devices from accessing the network.
To set up network access control:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The previous figure shows two WiFi devices connected.
5. Select the Turn on Access Control check box.
AC1200 WiFi Router Model R6120
Control Access to the Internet
39