1. Getting Started
1. Bridge unit
Relays paper to the finisher.
2. Exposure glass cover
1
Lower this cover over originals.
3. Auto document feeder (ADF)
Load a stack of originals here. They will feed in automatically.
4. Interchange unit
Required when installing the internal tray 2 (1 bin tray).
5. Internal tray 2 (1 bin tray)
If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.
6. Handset
Used as a receiver when a fax unit is installed.
7. Large capacity tray (LCT)
Holds up to 2,000 sheets of paper.
8. Paper tray unit
Consists of two paper trays. Holds up to 1,000 sheets of paper. Each paper tray holds 500 sheets.
9. Shift sort tray
Sorts and stacks multiple sheets of paper.
10. Booklet finisher
Sorts, stacks, staples, and punches multiple sheets of paper. The saddle stitch function can staple multiple sheets
of paper in the center and fold them into booklets. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
• Finisher booklet tray
11. 1000-sheet finisher
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
12. 500-sheet finisher
Sorts, stacks, and staples multiple sheets of paper.
Internal options
This section describes the options that can be installed in the machine.
• Fax unit
Allows you to use the facsimile function.
• PostScript 3 Unit
36