Connecting To A Local Area Network (Lan) (Select Products Only) - HP EliteBook x360 1030 User Manual

WARNING!
cable or telephone cable into an RJ-45 (network) jack.

Connecting to a local area network (LAN) (select products only)

Use a LAN connection if you want to connect the computer directly to a router in your home (instead of
working wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an 8-pin, RJ-45 network cable or an optional docking device or expansion port, if
there is no RJ-45 port on the computer.
To connect the network cable, follow these steps:
1. Plug the network cable into the network jack (1) on the computer.
2. Plug the other end of the network cable into a network wall jack (2) or router.
NOTE:
TV and radio reception, orient the circuitry end of the cable toward the computer.
22 Chapter 3 Network connections
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem
If the network cable contains noise suppression circuitry (3), which prevents interference from
ENWW