Important Safety Information - Algo 8188 Installation/Configuration Manual

ALGO

Important Safety Information

INSTALLATION
An improperly installed 8188 SIP Ceiling Speaker could fall from the
ceiling and cause serious injury or death. The four screw mounting
clamps will adequately support the speaker if the ceiling material is
sufficiently strong. An optional T-bar mounting bracket (Algo
8188TBR) is recommended for acoustic ceiling tile and may be
required for compliance with local building code. A ¼-20 threaded
insert nut on top of the speaker housing can accept an eye-bolt (not
supplied) for chain or cable support and additional safety.
Local building codes may require one or more additional safety
measures, particularly in earthquake prone regions.
EMERGENCY COMMUNICATION
If used in an emergency communication application, the 8188 SIP
Ceiling Speaker should be routinely tested. SNMP supervision is
recommended for assurance of proper operation. Contact Algo for
other methods of operational assurance including the use of the
integrated microphone for automated "sound to air" acoustic testing.
DRY INDOOR LOCATION ONLY
The 8188 SIP Ceiling Speaker is intended for dry indoor locations only.
For outdoor locations Algo offers weatherproof speakers and strobe
lights.
CAT5 or CAT6 connection wiring to an IEEE 802.3af compliant
network PoE switch must not leave the building perimeter
without adequate lightning protection.
No wiring connected to the 8188 SIP Ceiling Speaker may leave
the building perimeter without adequate lightning protection.
Document 90-00068
2017-03-28
Page 8
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker
(604) 454-3792
support@algosolutions.com