Zone Definition; Page Tone And Page Volume - Algo 8188 Installation/Configuration Manual

ALGO

Zone Definition

The "Expanded" Slave or Master zones can be enabled/disabled in
Basic Settings > Multicast. Default IP addresses and ports may be
revised for any given zone in the table.
Ensure that the Address and Port settings are the same for all master
and slave devices.

Page Tone and Page Volume

Master Mode: By default, the same tone can be set for all Slave
zones in the Basic Settings > Features tab. Unique paging tones may
be revised for any given slave zone in the table above.
Slave Mode: When an Algo device is the multicast Master, a page
tone will play on the Slave device, so it is recommended to set the
Slave tone to "None". If a page is received from a non-Algo device
that doesn't send a tone, a tone can be inserted on the Slaves
(above) each time they detect page audio starting, allowing them to
play a tone.
By default, the same page volume can be set for all Slave zones in
the Basic Settings > Features tab. Unique page volumes may be
revised on a per-zone basis in the table above. For instance,
emergency pages can be louder on certain Slave speakers.
Document 90-00068
2017-03-28
Page 59
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker
(604) 454-3792
support@algosolutions.com