Advanced Settings Tab - Provisioning - Algo 8188 Installation/Configuration Manual

ALGO
Advanced Settings Tab – Provisioning
Provisioning allows installers to pre-configure 8188 SIP Ceiling
Speaker units prior to installation on a network. It is typically used
for large deployments to save time and ensure consistent setups.
There are two different Provisioning methods that can be used: via
DHCP Option 66 or via a Static Server. In addition, there are three
different ways to download provisioning files from a "Provisioning
Server": TFTP (Trivial File Transfer Protocol), FTP, or HTTP.
For example, 8188 configuration files can be automatically
downloaded from a TFTP server using DHCP Option 66.
This option code (when set) supplies a TFTP boot server address to
the DHCP client to boot from.
DHCP must be enabled if using DHCP Option 66, in order for
Provisioning to work.
One of two files can be uploaded on the Provisioning Server (for
access via TFTP, FTP, or HTTP):
Generic (for all Algo 8188 Speakers)
Specific (for a specific MAC address)
Document 90-00068
2017-03-28
Page 48
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker
algop8188.conf
algom[MAC].conf
(604) 454-3792
support@algosolutions.com