Call Mode; Outbound Ring Limit; Ringback Tone; Maximum Call Duration - Algo 8188 Installation/Configuration Manual

ALGO

Call Mode

This setting is available when the "Make SIP Voice Call" option is
enabled. If the "Regular Two-Way Call" setting is chosen, a relay
closure will prompt an intercom-like call via the speaker and its
microphone to a pre-configured extension. When the "Silent
Microphone Monitoring" is enabled, the relay will prompt only the
audio from the 8188's microphone to be heard at the pre-configured
extension, while the speaker remains silent. This setting is ideal in
settings where silent emergency calls to a pre-configured extension
may be needed with a single press of a button.

Outbound Ring Limit

Typically set to ensure that a call will not reach voicemail. This
feature can be used to set a limit on how long the speaker will ring
before timing out.

Ringback Tone

If enabled, a ringback tone will play over the speaker during an
outbound SIP call, while waiting for the far-end party to answer.

Maximum Call Duration

Select the maximum call length. The call will be terminated once the
maximum time is reached. In the event that a call inadvertently
reaches voicemail or gets accidentally left on hold, this setting
ensures that the 8188 returns on-hook.

Output Light

Enable/Disable the blue light on the speaker entirely (keep the light
off even when the speaker is active).

Heartbeat Light

If enabled, the small blue indicator will flash every 30 seconds as
visual confirmation that the 8188 is powered and running.

Output Relay

Enable/Disable the relay output on the speaker.
Document 90-00068
2017-03-28
Page 36
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker
(604) 454-3792
support@algosolutions.com