Additional Features Tab - Input/Output; 1202 Call Button; 1203 Call Switch - Algo 8188 Installation/Configuration Manual

ALGO
Additional Features Tab – Input/Output
When triggered by an input relay, 8188 SIP Ceiling Speaker can
perform actions such as playing a pre-recorded announcement over
the speaker(s), sending the announcement as a private message to a
phone, or initiating a two-way conversation between the speaker and
a phone.
The input relay to the 8188 SIP Ceiling Speaker(s) can be prompted
by any normally open or normally closed switch. Algo offers the 1202
Call Button or the 1203 Call Switch with supervision. Via supervision
settings, notification actions can also be triggered if the input switch
is disconnected.
The 8188 SIP Ceiling Speaker can execute the following actions when
triggered by an input relay:




1202 Call Button

1203 Call Switch

Document 90-00068
2017-03-28
Page 32
Play Tone
Make SIP Voice Call
Make SIP Call with Tone
The 1202 Call Button is a one-touch button for event
notification and response. It can be used with the
8188 for improved customer service, emergency
notification, and non-emergency alerting. The Call
Button's one-touch button can trigger a single or
continuous action, which can be halted via the small
cancel/reset button located below the main call
button.
The 1203 Call Switch is a simple contact closure switch
with an illuminated button and supervision capabilities.
When used in conjunction with the 8188, the 1203 can
prompt a single action with one-touch, or a continuous
action if the button is held.
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker
(604) 454-3792
support@algosolutions.com