Sip Ring Event; Sip Activated Notification Alerts; Wiring Connections; Network Connection - Algo 8188 Installation/Configuration Manual

ALGO

SIP Ring Event

Set Monitoring Mode to "Monitor Ring". When a call is made to the
SIP extension the 8188 will play the selected WAV file from memory.
Often, the 8188 will be part of a hunt group or ring group to ring in
conjunction with a telephone.

SIP Activated Notification Alerts

In addition to voice paging, the 8188 SIP Ceiling Speaker can play
audio files for emergency, safety, and security announcements,
customer service, shift changes, etc.
Audio WAV files can be stored in speaker memory and played over
the speaker in response to an event such as a ring or relay input, and
also multicast to other Algo SIP endpoints on the network. See
"Additional Features > Emergency Alerts" and "Additional Features >
Input/Output" for more details.

Wiring Connections

Network Connection

The speaker provides a RJ45 jack for network connection. A cable run
from the switch can be terminated to a modular jack with connection
by patch cord, or terminated with a RJ45 plug.
PoE (Power over Ethernet) must be 48V 350 mA IEEE 802.3af
compliant whether provided by the network switch or injector.
There are two lights on the Ethernet jack:
Green light: On when Ethernet is working, flickers off to indicate
activity on the port.
Amber light: Off when successful 100Mbps link is established.
Typically on only briefly at power up.
Under normal conditions, the Amber light will turn on immediately
after the Ethernet cable is first connected. This indicates that PoE
power has been successfully applied. Once the device connects to the
network, it will switch to the Green light instead, which will typically
flicker indicating traffic on the network.
Document 90-00068
2017-03-28
Page 18
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker
(604) 454-3792
support@algosolutions.com