Md5 Checksum; Generating A Generic Configuration File - Algo 8186 Installation/Configuration Manual

MD5 Checksum

In addition to the .conf file, an .md5 checksum file must also be
uploaded to the Provisioning server. This checksum file is used to
verify that the .conf file is transferred correctly without error.
A tool such as can be found at the website address below may be
used to generate this file:
http://www.fourmilab.ch/md5
The application doesn't need an installation. To use the tool, simply
unzip and run the application (md5) from a command prompt. The
proper .md5 file will be generated in the same directory.
If using the above tool, be sure to use the "-l" parameter to generate
lower case letters.

Generating a generic configuration file

1. Connect 8186 to the network
2. Access the 8186 Web Interface Control Panel
3. Configure the 8186 with desired options
4. Click on the System tab and then Maintenance.
5. Click "Backup" to download the current configuration file
6. Save the file settings.txt
7. Rename file settings.txt to algop8186.conf
8. File algop8186.conf can now be uploaded onto the Provisioning
If using a generic configuration file, extensions and credentials have
to be entered manually once the 8186 SIP Horn Speaker has
automatically downloaded the configuration file.
Document 90-00079
2016-12-08
Page 51
server
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker
(604) 454-3792
support@algosolutions.com