Table of Contents
Advertisement
Action - Make SIP Voice Call
Upon receiving input, a voice path will open for an intercom-like call
via the 8186 SIP Horn Speaker's microphone to a pre-configured
phone extension. This option can be used when a call needs to be
made from a public place where a phone would not be practical to
use.
Action - Make a SIP Call with Tone
An input can also generate a private call to a pre-configured phone
extension with a pre-recorded message. For instance, a call to a
supervisor's phone notifying about an emergency or intrusion at
some location.
Action When Tamper Detected (Supervision)
In addition to the main events, the device can be configured with
supervision to also execute one of the above three actions in case the
input switch is disconnected due to wiring failure or after being
tampered with. For example, a tone could sound over the speaker(s),
or a private pre-recorded message could be sent to a specified phone
extension. The supervision configuration options will appear once a
relay option with supervision is selected. See the Electrical
Specification section for details on supervision detection circuit.
Document 90-00079
2016-12-08
Page 36
Action When Input Triggered:
o Extension to Dial
o Call Mode
o Allow 2
Button Press to End & Restart Call
nd
Outbound SIP Call Settings:
o Outbound Ring Limit
o Ringback Tone
o Maximum Call Duration
Action When Input Triggered:
o Extension to Dial
o Allow 2
nd
Button Press to End & Restart Call
o Tone/Pre-recorded Announcement
o Interval Between Tone (seconds)
o Maximum Tone Duration
Outbound SIP Call Settings:
o Outbound Ring Limit
o Ringback Tone
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker
(604) 454-3792
support@algosolutions.com
Hide quick links:
Advertisement
Table of Contents
