HP ProBook 640 G1 Maintenance And Service Manual page 75
This document is intended for hp authorized service providers only.
Hide thumbs
Also See for ProBook 640 G1:
- Overview (61 pages) ,
- Maintenance and service manual (170 pages)
Table of Contents
Advertisement
2.
Loosen the 4 hard drive screws (2). Pull the hard drive tab (3) to the right to disconnect the hard drive.
3.
Lift the hard drive (4), and then pull the hard drive out of the hard drive bay.
4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Position the hard drive with the hard drive tab toward you.
b.
Remove the four Phillips screws (1) that secure the hard drive bracket to the hard drive.
Component replacement procedures
67
Advertisement
Table of Contents
