HP ProBook 640 G1 Maintenance And Service Manual page 112
This document is intended for hp authorized service providers only.
Hide thumbs
Also See for ProBook 640 G1:
- Overview (61 pages) ,
- Maintenance and service manual (170 pages)
Table of Contents
Advertisement
2.
Remove the five Torx screws (1) and the Phillips screw (2) that secure the system board to the
base enclosure.
3.
Lift up on the left side of the system board (1) until it rests at an angle.
4.
Remove the system board (2) by sliding it up and to the left at an angle.
Reverse this procedure to install the system board.
104 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Advertisement
Table of Contents
