Speakers - HP ENVY x360 Maintenance And Service Manual

Speakers

Description
Speakers (2, include left and right speakers and cables)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the speakers:
1. Disconnect the speaker cables (1) from the system board.
2. Remove the three Phillips PM2.0×2.8 screws (2) that secure the speakers to the keyboard/top cover.
3. Remove the speakers (3).
Reverse this procedure to install the speakers.
26 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 22).
20).
Spare part number
801501-001