Battery - HP ENVY x360 Maintenance And Service Manual

Battery

Description
3-cell, 56-WHr, 4.96-AHr, Li-ion battery (includes cable)
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Release the tape (2) that secures the left speaker cable to the battery.
3. Release the right speaker cable (3) from the retention clips built into the battery.
4. Remove the four Phillips M2.0×4.1 screws (1) that secure the battery to the keyboard/top cover.
22 Chapter 5 Removal and replacement procedures
Bottom cover on page 20).
Spare part number
789116-005