Solid-State Drive (Select Products Only) - HP 640 ProBook G3 Series Maintenance And Service Manual

3. If it is necessary to disassemble the hard drive, remove the 4 screws (1), and then remove pull the tab
(2) to remove the cover from the hard drive.
Reverse this procedure to reassemble and install the hard drive.

Solid-state drive (select products only)

Description
Solid-state drive
360 GB PCle TLC
128 GB M2 SATA-3 Value
256 GB Turbo G2 TLC
256 GB SATA-3 self-encrypting drive Opal2 TLC
512 GB Turbo G2 TLC
512 GB Turbo G2 self-encrypting drive Opal2 TLC
IMPORTANT:
replacement
Before removing the solid-state drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
Make special note of each screw and screw lock size and location during removal and
Spare part number
922249-001
922250-001
922251-001
922252-001
922253-001
922254-001
Component replacement procedures 41