Setting Up The Copy Application; Installing The Copy Application - Ricoh AFICIO MP01 Operating Instructions Manual

SETTING UP THE COPY APPLICATION

Installing the Copy Application

1
After starting Microsoft Windows 95, insert the disk labeled "Copy Application
set up program disk" into the computer's disk drive.
2
Run "\Setup.exe" from the disk.
When the setup screen is displayed, click the [Next] button.
3
Next, the "Choose destination location" screen is displayed.
If the directory in which you want to install the program is correct, click the
[Next] botton, and skip step
Note: Install the Copy Application on to a disk with 200 MB or more free
disk space available.
If you want to select another directory, click the [Browse] button.
4
If the [Browse] button is clicked, the "Choose directory" screen is displayed.
Select the directory in which you want to install the program and click the
[OK] button. If the [Cancel] button is clicked, the directory selection is
stopped.
If the set directory name is new, a message is displayed. If this is OK, click
the [OK] button.
5
The "Setup option" screen is displayed.
After setting the following items, click the [Next] button. The installation is
started.
Language:
Select from English (US), English (UK), French, German, and Italian.
Operation panel selection:
Click the check box if an external operation panel is to be used.
Operation panel port number selection:
If the operation panel check box has been clicked, select a port number
from 1 to 4.
Note : When installing an additional external operation panel after the installation
is completed, uninstall the program and install it again.
Refer to "Uninstall the Copy Application" in this chapter.
SETTING UP THE COPY APPLICATION
4
.
1-3