Connect The Extender To An Existing Network - Kasda KW5583 User Manual

Warning: Upgrading firmware may take a few minutes; please don't turn off the power or press
the reset button.
Upgrade must not be interrupted!!

3.2 Connect the Extender to an Existing Network

3.2.1 Connect the Extender to an Existing Network
Here you can use quick setup page to connect the Extender to an Existing Network. This page
will guide you through the process step by step configuration wireless extensions.
Step 1: Click the start button to search for available near the SSID.
Step 2: After completion of the progress bar will automatically jump to the next screen, please
wait around 30s.
Step 3: Select the SSID in the table you need as the primary SSID. Its security mode will be
filled in the Security Mode list, please input password that you have selected. And then click
next.
21