Table of Contents
Advertisement
b.
Check the Client Link LED
•
If the Client Link LED is solid green or amber, your extended
WiFi network reaches the area with a poor router WiFi signal
and your network setup is complete.
•
If the Client Link LED is red, your extended WiFi network
does not reach the area with a poor router WiFi signal.
You must move the computer or WiFi device closer to the
extender until the Client Link LED turns solid green or amber.
Connect Ethernet-Enabled Devices
After the extender is connected to your existing WiFi network, you can
connect a device to the extender using an Ethernet cable. Then that device
can access your existing network through the extender-to-router WiFi
connection.
WiFi router
Extender
on the extender:
12
Blu-ray player
TV
Gaming console
Advertisement
Table of Contents
