Page 1
Ricoh SG 3110DN - WinProfile Setup and Print Guide: Elements 8, 9 & 10 IMPORTANT: Before proceeding, please ensure the correct Ricoh (OEM) printer driver and SubliJet-R WinProfile have been installed. For assistance with driver and profile installation, refer to the Installation Guide.
Page 2
SubliJet-R: Ricoh SG 3110DN - WinProfile Setup and Print Guide: Elements 8, 9 & 10 The Color Settings window should now be open. Match your settings to those shown below: (see FIGURE 2) FIGURE 2 A. Select the radio button for No Color Management B.
Page 3
FIGURE 4). FIGURE 4 Printing from Elements with the Ricoh SG 3110DN With the correct colour settings entered, you are now ready to print. In the Menu Bar, click File > Print. This will open the Print window. Match your settings to those shown below: (see FIGURE 5) FIGURE 5 A.
Page 4
H. Click OK to save your changes and continue (see FIGURE 5) Click Print when you are ready to print your image (see FIGURE 5) Congratulations! Photoshop Elements setup is now complete. Remember to select the RICOH AficioSG3110DN RPCS-R each time you are ready to print.