Function Chart; List Of Parameters - Record DFA 127 User Manual

Configurations

Function chart:

BDE2 / clamp 2
(L = interruption or 0 V, H = + 24 V )
Toggle switch BDI on the side cover or external
BDE2 / Clamp 2
L
H
L

List of parameters:

If no BDE-D is connected and the DFA 127 is connected to an electronic
lock, the "Always locked" operation mode must be configured.
Menu: Locking / Locking function / Always locked
For the correct function of "Manual operation with active sensors" the
function must be configured and the BDE-D or the rocker switch must be
set on
The door can be operated manually like a common door. For handi-
capped people the door can be opened by a remote control.
Menu: Manual control / Active sensors / SIS disabled or SIS enabled
Do not activate manual control with supported closing!
Page 38 of 55
Mechanical BDE (external BDE)
BDE1 / clamp 1
L
L
H
H
BDE1 / Clamp 1
H
L
L
.
12/2006 Rev. B
Function
L
H continuously open
H
L automatic
Function if the
external mech. BDE
is not configured
continuously open
manual
automatic
locked
manual
Function if the
external mech. BDE
will be configured
continuously open
automatic
locked
Manual DFA 127 Full Power