Safety Instructions; Use As Intended; General Safety And Accident-Prevention Regulations - Record DFA 127 User Manual

2

Safety Instructions

The DFA 127 has been constructed to the latest state-of-the-art and the recog-
nised technical safety regulations, including, for example, limitation of forces and
speeds. Danger can arise for users, however, if not used as intended.
Installation, maintenance and repairs on the DFA 127 may only be car-
ried out by qualified and authorised personnel.

2.1 Use as intended

The DFA 127 swing door operator is designed exclusively for the normal operation
of swing doors in dry rooms, and must be installed within or inside buildings.
Any different application or use extending beyond this purpose is not considered to
be use for the intended purpose. The manufacturer declines all responsibility for
any damage resulting from this; the operator alone will bear the associated risk.
Use for the intended purpose also includes observation of the operating conditions
specified by the manufacturer, including the use and adjustment of the correct type
of arms, in addition to regular maintenance and repair.
Unauthorised modifications to the automatic door operator will exclude any liability
of the manufacturer for resulting damage.

2.2 General safety and accident-prevention regulations

In general, no safety devices (sensors) may be dismantled or put out of
service.
The safety devices (sensors) are switched off during the learning cycle
(which must only be performed by trained personnel)! Before initiating
the learning cycle, it must therefore be ensured that no persons or ob-
jects are situated in the danger zone of the moving door leaves during
operation in order to avoid injury or damage!
No objects must be placed in the opening zone / path of the swing door
to avoid crushing and shearing points!
The safeguard against crushing and shearing strains at the side edge
must be provided by the manufacturer.
Manual DFA 127 Full Power 12/2006 Rev. B Page 3 of 55