Setting The Year, Time, And Date - Accu-Chek COMPACT PLUS Owner's Booklet

BEEPER

Setting the Year, Time, and Date

Your new meter comes with the batteries already installed and a preset time and date. You may need to change
the time to your time zone. Setting the time and date is important if you use the meter's memory or download
your stored results to a computer.
1. With the meter off, press
The meter turns on and briefly shows the display
symbols. Next, the beeper symbol is displayed with
your current selection flashing.
Chapter 1: Understanding Your New Meter
BRIGHTNESS TIME / DATE
to enter the set mode.
S S
You are here
TEST REMINDERS
2. Press twice to reach the year with the last two
S S
numbers of the year flashing. Press
the year. Press
14
ACCU-CHEK Customer Care Service Center 1-800-858-8072
HYPO
set
to change
M
M
to set your selection.
S S