Chapter 5. Troubleshooting & Support - Coredy E750 User Manual

Chapter 5. Troubleshooting & Support
How can I restore my E750 to its factory default
Q1
settings?
(1)
Power on the E750, hold the Reset button by using a
Reset Pin for approximately 3 seconds.
(2)
Release the reset button while all lights flashing.
When some of lights slow down flashing, the device
has been reset successfully.
Why can't I log in the Web Management Page/Setup
Q2
Page ?
(1) Make sure your computer is connecting the E750's network,
and its fixed IP address has been changed to
Address
Or login by your Smart Phone or Tablet PC after connecting
the E750's network.
(2) Try both the default address:
192.168.10.1.
(3) In Repeater (Range Extender)
Router temporarily, connect your PC/devices to the E750 via
an Ethernet Cable (Recommended) or Wirelessly. Then you
could login the Web Management Page.
Automatically.
Wi-Fi
WPS
WAN/LAN
LAN
POWER
WPS
http://ap.setup/
Mode, turn off your main
33
Table Contents
Obtain an IP
and default IP: