Troubleshooting - Hitron HT-EMN2 User Manual

6

Troubleshooting

Use this section to solve common problems with the HT-EMN2 and your network. It
contains the following sections:
None of the LEDs Turn On
One of the LEDs does not Display as Expected
I Forgot the HT-EMN2's IP Address
I Forgot the HT-EMN2's Admin Username or Password
I Cannot Access the HT-EMN2 or the Internet
I Cannot Connect My Wireless Device
Problem: None of the LEDs Turn On
The HT-EMN2 is not receiving power, or there is a fault with the device.
1
Ensure that you are using the correct power adaptor.

Using a power adaptor other than the one that came with your HT-EMN2
can damage the HT-EMN2.
2
Ensure that the power adaptor is connected to the HT-EMN2 and the wall socket
(or other power source) correctly.
3
Ensure that the power source is functioning correctly. Replace any broken fuses
or reset any tripped circuit breakers.
4
Disconnect and re-connect the power adaptor to the power source and the HT-
EMN2.
48 48
Version 1.0, 04/2015. Copyright
Version 1.0, 04/2015. Copyright
Hitron HT-EMN2 User's Guide
on page 48
on page
on page 49
on page
on page 50
49
on page 49
49
2012 Hitron Technologies
2015 Hitron Technologies
TROUBLESHOOTING