Login To The Ht-Emn2 - Hitron HT-EMN2 User Manual

Take the following steps to manually set up your computer's IP address to connect to
the HT-EMN2:
NOTE: This example uses Windows 7; the procedure for your operating system may
be different.
1
Click Start, then click Control Panel.
2
In the window that displays, double-click Network Connections.
3
Right-click your network connection (usually Local Area Connection) and click
Properties.
4
In the General tab's This connection uses the following items list, scroll
down and select Internet Protocol (TCP/IP). Click Properties.
5
You can get an IP address automatically, or specify one manually:
If your network has an active DHCP server, select Get an IP address
automatically.
If your network does not have an active DHCP server, select Use the
following IP address. In the IP address field, enter a value between
192.168.0.1 and 192.168.0.253 (default). In the Subnet mask field, enter
255.255.255.0 (default).
NOTE: If your HT-EMN2 is not using the default IP address, enter an IP address and
subnet mask that places your computer in the same subnet as the HT-EMN2.
6
Click OK. The Internet Protocol (TCP/IP) window closes. In the Local Area
Connection Properties window, click OK.
Your computer now obtains an IP address from the HT-EMN2, or uses the IP address
that you specified, and can communicate with the HT-EMN2.
1.5

Login to the HT-EMN2

Take the following steps to login to the HT-EMN2's GUI.
17 17
Version 1.0, 04/2015. Copyright
Version 1.0, 04/2015. Copyright
Hitron HT-EMN2 User's Guide
2012 Hitron Technologies
2015 Hitron Technologies
INTRODUCTION