Installing a new web holder roller
The holder [A] has a one-way clutch. Make sure that the holder [A] is set at the front side.
Installing new web rollers
1.
Install the web supply roller [A] first (
pin [B].
2.
Install the web take up roller [C] (
outside the web take up roller.
3.
Reinstall the rear gear bracket (
4.
Reinstall the front and rear gears and bushings (
Rollers").
5.
Reinstall the rear gear bracket (
SM
). Make sure that the web sheet is under the
). Make sure that the printed number [D] is
p.4-63 "Web Holder Roller and Web Rollers").
p.4-63 "Web Holder Roller and Web
p.4-63 "Web Holder Roller and Web Rollers").
4-65
Fusing
D129/D130